Siemens Selectivity Module, for use with SITOP
Tehnička dokumentacija
Tehnički podaci
Brand
SiemensAccessory Type
Selectivity Module
For Use With
SITOP
Input Current Range
0.5 → 3A
Standards Met
CE, cULus
Supply Voltage
24V dc
AC or DC Output Voltage
dc
Output Current
3A
AC or DC Input Voltage
dc
Input Voltage
22 → 30V dc
Zemlja podrijetla
Austria
Detalji o proizvodu
SITOP PSE200U Selectivity Module
The SITOP PSE200U selectivity module is the optimal addition to all 24 V power supplies for distributing and monitoring the load current across several branch circuits. Overload and short-circuit in one or more feeders are reliably detected.
The electronics tolerate short-term current peaks, e.g. due to high inrush current, and de-energize feeders with longer overload. This is ensured even on high-resistance cables and for short-circuits that develop slowly over time.
The intact feeders continue to be supplied with 24 V without any interruption or disturbance, thereby minimizing plant downtimes. The faulty feeder is signalled using LEDs and a group signal contact. Regardless of the industry or requirements, Siemens offers reliable and efficient power supplies for every plant.
Approvals
CE, cULus, UR, CB, ATEX, IEXEx, cCSAus Class I Div 2, GL, ABS
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 467,19
Each (bez PDV-a)
KM 546,61
Each (s PDV-om)
1
KM 467,19
Each (bez PDV-a)
KM 546,61
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
SiemensAccessory Type
Selectivity Module
For Use With
SITOP
Input Current Range
0.5 → 3A
Standards Met
CE, cULus
Supply Voltage
24V dc
AC or DC Output Voltage
dc
Output Current
3A
AC or DC Input Voltage
dc
Input Voltage
22 → 30V dc
Zemlja podrijetla
Austria
Detalji o proizvodu
SITOP PSE200U Selectivity Module
The SITOP PSE200U selectivity module is the optimal addition to all 24 V power supplies for distributing and monitoring the load current across several branch circuits. Overload and short-circuit in one or more feeders are reliably detected.
The electronics tolerate short-term current peaks, e.g. due to high inrush current, and de-energize feeders with longer overload. This is ensured even on high-resistance cables and for short-circuits that develop slowly over time.
The intact feeders continue to be supplied with 24 V without any interruption or disturbance, thereby minimizing plant downtimes. The faulty feeder is signalled using LEDs and a group signal contact. Regardless of the industry or requirements, Siemens offers reliable and efficient power supplies for every plant.
Approvals
CE, cULus, UR, CB, ATEX, IEXEx, cCSAus Class I Div 2, GL, ABS