Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Maximum Operating Supply Voltage
52 V
Pin Count
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Length
16mm
Height
3.3mm
Width
11.1mm
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+150 °C
Minimum Operating Temperature
-40 °C
Detalji o proizvodu
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 8.001
RSD 1.600 komad (isporucivo u Tubi) (bez PDV-a)
RSD 9.602
RSD 1.920 komad (isporucivo u Tubi) (s PDV-om)
Proizvodno pakovanje (cev)
5
RSD 8.001
RSD 1.600 komad (isporucivo u Tubi) (bez PDV-a)
RSD 9.602
RSD 1.920 komad (isporucivo u Tubi) (s PDV-om)
Proizvodno pakovanje (cev)
5
Kupujte na veliko
količina | Jedinična cena |
---|---|
5 - 9 | RSD 1.600 |
10 - 24 | RSD 1.502 |
25+ | RSD 1.404 |
Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Maximum Operating Supply Voltage
52 V
Pin Count
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Length
16mm
Height
3.3mm
Width
11.1mm
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+150 °C
Minimum Operating Temperature
-40 °C
Detalji o proizvodu
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.