Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityNumber Of Contacts
9
D-Sub Shell Size
E
Housing Material
PA
Body Orientation
Straight
Colour
Black
Series
1991253
Zemlja podrijetla
Denmark
Detalji o proizvodu
TE Connectivity Plastic Backshell for D-Subminiature Connector
Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:
2 x polyamide jack screw knobs
2 x zinc plated carbon steel jackscrews with a 4-40 thread size
1 x polyamide cable clamp base
1 x zinc plated carbon steel cable clamp
2 x zinc plated carbon steel fixing screws
1 x polyamide backshell body
TE Connectivity AMPLIMITE D-Subminiature Connectors
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 5,515
Each (In a Bag of 500) (bez PDV-a)
KM 6,453
Each (In a Bag of 500) (s PDV-om)
500
KM 5,515
Each (In a Bag of 500) (bez PDV-a)
KM 6,453
Each (In a Bag of 500) (s PDV-om)
500
Kupujte na veliko
količina | Jedinična cijena | Po kesa |
---|---|---|
500 - 500 | KM 5,515 | KM 2.757,70 |
1000 - 1000 | KM 5,299 | KM 2.649,55 |
1500+ | KM 5,191 | KM 2.595,48 |
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityNumber Of Contacts
9
D-Sub Shell Size
E
Housing Material
PA
Body Orientation
Straight
Colour
Black
Series
1991253
Zemlja podrijetla
Denmark
Detalji o proizvodu
TE Connectivity Plastic Backshell for D-Subminiature Connector
Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:
2 x polyamide jack screw knobs
2 x zinc plated carbon steel jackscrews with a 4-40 thread size
1 x polyamide cable clamp base
1 x zinc plated carbon steel cable clamp
2 x zinc plated carbon steel fixing screws
1 x polyamide backshell body