TE Connectivity Male 100 Pin Right Angle Cable Mount SCSI Connector 1.27mm Pitch, IDC
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityGender
Male
Number Of Contacts
100
Body Orientation
Right Angle
Mounting Type
Cable Mount
Contact Material
Phosphor Bronze
Contact Plating
Gold over Palladium Nickel
Housing Material
Thermoplastic
Pitch
1.27mm
Current Rating
1A
Voltage Rating
30 V ac
Termination Method
IDC
Length
71.86mm
Width
14.94mm
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+105°C
Detalji o proizvodu
TE Connectivity AMPLIMITE .050 Series III Shielded D-Sub Cable Plugs
The AMPLIMITE .050 series III shielded D-sub cable plugs with a compact design, high density D type interface and a 1.27 x 2.54 mm centreline. These AMPLIMITE .050 series III d-subminiature connectors have a steel shell with a tin nickel plating which provides excellent EMI/RFI protection. The connectors are preloaded with gold plated IDC pin contacts that provide fast, reliable and economical terminations onto discrete wire or ribbon cable. These AMPLIMITE .050 Series III Shielded D-Sub cable plugs are supplied with standard termination covers. Versions of these d-sub connectors are available with latching blocks which provide quick easy connection and disconnection. Versions are also available with rails which provide extra alignment and prevent the connector moving reducing contact damage. The backshell kits for these connectors must be ordered separately. These connectors are used with round jacketed cable (discrete or laminated)
Part numbers X-5749111-X are supplied with both rails and latching blocks
Part numbers X-5749621-X are supplied with latching blocks
Standards
SCSI-2, SCSI-3, EIA RS-232, ISO-11569 (26 position cable assembly with spring latches), IPI-2, HIPPI and IEE 802.3 MII standards
TE Connectivity AMPLIMITE D-Subminiature Connectors
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 51,91
Each (Supplied in a Box) (bez PDV-a)
KM 60,73
Each (Supplied in a Box) (s PDV-om)
Proizvodno pakovanje (kutija)
1
KM 51,91
Each (Supplied in a Box) (bez PDV-a)
KM 60,73
Each (Supplied in a Box) (s PDV-om)
Proizvodno pakovanje (kutija)
1
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityGender
Male
Number Of Contacts
100
Body Orientation
Right Angle
Mounting Type
Cable Mount
Contact Material
Phosphor Bronze
Contact Plating
Gold over Palladium Nickel
Housing Material
Thermoplastic
Pitch
1.27mm
Current Rating
1A
Voltage Rating
30 V ac
Termination Method
IDC
Length
71.86mm
Width
14.94mm
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+105°C
Detalji o proizvodu
TE Connectivity AMPLIMITE .050 Series III Shielded D-Sub Cable Plugs
The AMPLIMITE .050 series III shielded D-sub cable plugs with a compact design, high density D type interface and a 1.27 x 2.54 mm centreline. These AMPLIMITE .050 series III d-subminiature connectors have a steel shell with a tin nickel plating which provides excellent EMI/RFI protection. The connectors are preloaded with gold plated IDC pin contacts that provide fast, reliable and economical terminations onto discrete wire or ribbon cable. These AMPLIMITE .050 Series III Shielded D-Sub cable plugs are supplied with standard termination covers. Versions of these d-sub connectors are available with latching blocks which provide quick easy connection and disconnection. Versions are also available with rails which provide extra alignment and prevent the connector moving reducing contact damage. The backshell kits for these connectors must be ordered separately. These connectors are used with round jacketed cable (discrete or laminated)
Part numbers X-5749111-X are supplied with both rails and latching blocks
Part numbers X-5749621-X are supplied with latching blocks
Standards
SCSI-2, SCSI-3, EIA RS-232, ISO-11569 (26 position cable assembly with spring latches), IPI-2, HIPPI and IEE 802.3 MII standards
TE Connectivity AMPLIMITE D-Subminiature Connectors
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda