TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter

RS kataloški broj:: 542-5707robna marka: TE ConnectivityProizvođački broj:: B-155-05
brand-logo
Prikaži sve u Solder Sleeves

Tehnička dokumentacija

Tehnički podaci

Minimum Cable Diameter

1.5mm

Maximum Cable Diameter

4.8mm

Sleeve Length

29.3mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

1

Colour

Transparent

Zemlja podrijetla

Mexico

Detalji o proizvodu

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

P.O.A.

TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter

P.O.A.

TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Minimum Cable Diameter

1.5mm

Maximum Cable Diameter

4.8mm

Sleeve Length

29.3mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

1

Colour

Transparent

Zemlja podrijetla

Mexico

Detalji o proizvodu

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.