LM393P Texas Instruments, Dual Comparator, CMOS/TTL/OC O/P, O/P, 1.3μs 2 → 36 V 8-Pin PDIP

RS kataloški broj:: 866-0231brend: Texas InstrumentsProizvođački broj:: LM393P
brand-logo
Prikaži sve u Comparators

Tehnička dokumentacija

Tehnički podaci

Comparator Type

General Purpose

Mounting Type

Through Hole

Package Type

PDIP

Power Supply Type

Dual, Single

Output Type

CMOS, MOS, Open Collector, TTL

Number of Channels per Chip

2

Typical Response Time

1.3µs

Pin Count

8

Typical Single Supply Voltage

2 → 36 V

Dimensions

10.16 x 6.6 x 4.57mm

Length

10.16mm

Width

6.6mm

Height

4.57mm

Typical Dual Supply Voltage

±36V

Minimum Operating Temperature

0 °C

Maximum Operating Temperature

+70 °C

Detalji o proizvodu

LMx93/LM2903 family Dual Comparators

The Texas Instruments LM193, LM293, LM393 and LM2903 are dual differential input voltage comparators designed to operate from a single power supply over a wide range of voltages. The common mode input voltage range includes ground and the devices have open collector outputs.

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više
Informacije o stanju skladišta trenutno nisu dostupne.

RSD 2.090

RSD 41,803 komad (u Tubi od 50) (bez PDV-a)

RSD 2.508

RSD 50,164 komad (u Tubi od 50) (s PDV-om)

LM393P Texas Instruments, Dual Comparator, CMOS/TTL/OC O/P, O/P, 1.3μs 2 → 36 V 8-Pin PDIP

RSD 2.090

RSD 41,803 komad (u Tubi od 50) (bez PDV-a)

RSD 2.508

RSD 50,164 komad (u Tubi od 50) (s PDV-om)

LM393P Texas Instruments, Dual Comparator, CMOS/TTL/OC O/P, O/P, 1.3μs 2 → 36 V 8-Pin PDIP
Informacije o stanju skladišta trenutno nisu dostupne.

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

količinaJedinična cenaPo cev
50 - 50RSD 41,803RSD 2.090
100+RSD 32,659RSD 1.633

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Comparator Type

General Purpose

Mounting Type

Through Hole

Package Type

PDIP

Power Supply Type

Dual, Single

Output Type

CMOS, MOS, Open Collector, TTL

Number of Channels per Chip

2

Typical Response Time

1.3µs

Pin Count

8

Typical Single Supply Voltage

2 → 36 V

Dimensions

10.16 x 6.6 x 4.57mm

Length

10.16mm

Width

6.6mm

Height

4.57mm

Typical Dual Supply Voltage

±36V

Minimum Operating Temperature

0 °C

Maximum Operating Temperature

+70 °C

Detalji o proizvodu

LMx93/LM2903 family Dual Comparators

The Texas Instruments LM193, LM293, LM393 and LM2903 are dual differential input voltage comparators designed to operate from a single power supply over a wide range of voltages. The common mode input voltage range includes ground and the devices have open collector outputs.

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više