AKER 20MHz Crystal ±30ppm HC-49-US SMD 4-Pin 13 x 4.7 x 5.2mm

RS kataloški broj:: 671-9359robna marka: AKERProizvođački broj:: CA4-20.000-18-3050-X
brand-logo
Prikaži sve u Crystal Units

Tehnička dokumentacija

Tehnički podaci

Outside Diameter

288mm

Minimum Operating Temperature

-40°C

Manufacturer Series

VSVA-B-B52-H-A1-1R2L

Best Temperature Measurement Accuracy

0.1%+5°C

Maximum Operating Temperature

85°C

Product Name

UART LCD Display Driver

Featured Device

MAX14906

Maximum Supported Resolution

3 Megapixels

Manufacturer Size Code

10B

Shoe Size EU

37.5

Mounting Type

Surface Mount

Brand

AKER

Height

5.2mm

Length

13mm

Number of Rows

2

Detalji o proizvodu

ADuM3150 Series SPIsolator Digital Isolators, Analog Devices

The ADuM3150 series, from Analog Devices, are 6-channel dedicated isolators for high-speed serial peripheral interfaces (SPIs). They form a part of the Analog Devices’ SPIsolator™ family. The ADuM3150 devices offer retimed clock signal improves timing margin to maximise speed.
Based on the Analog Devices’ iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS SPI bus signals supports SPI clock rates of up to 17 MHz. These channels operate with 14 ns propagation delay and 1 ns jitter to optimize timing for SPI.
The ADuM3150 isolator also provides two additional independent low data rate isolation channels, one channel in each direction. Data in the slow channels is sampled and serialized for a 250 kbps data rate with 2.5 μs of jitter. The ADuM3150 SPIsolator™ supports a delay clock output on the master side of the device. This output can be used with an additional clocked port on the master to support 40 MHz clock performance.
Suitable applications for the ADuM3150 SPIsolator™ include industrial programmable logic controllers (PLC) and sensor isolation.

Digital Isolators, Analog Devices

A comprehensive range of Digital Isolators featuring iCoupler® technology from Analog Devices. These products combine high speed CMOS and monolithic air core transformer technologies to provide outstanding performance characteristics superior to alternative product types such as opto-coupled devices and exhibit superior long-term reliability, stability and longevity.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 5,407

komadno (u pakovanju od 5) (bez PDV-a)

KM 6,326

komadno (u pakovanju od 5) (s PDV-om)

AKER 20MHz Crystal ±30ppm HC-49-US SMD 4-Pin 13 x 4.7 x 5.2mm
Odaberite vrstu pakovanja

KM 5,407

komadno (u pakovanju od 5) (bez PDV-a)

KM 6,326

komadno (u pakovanju od 5) (s PDV-om)

AKER 20MHz Crystal ±30ppm HC-49-US SMD 4-Pin 13 x 4.7 x 5.2mm
Informacije o stanju skladišta trenutno nisu dostupne.
Odaberite vrstu pakovanja

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Outside Diameter

288mm

Minimum Operating Temperature

-40°C

Manufacturer Series

VSVA-B-B52-H-A1-1R2L

Best Temperature Measurement Accuracy

0.1%+5°C

Maximum Operating Temperature

85°C

Product Name

UART LCD Display Driver

Featured Device

MAX14906

Maximum Supported Resolution

3 Megapixels

Manufacturer Size Code

10B

Shoe Size EU

37.5

Mounting Type

Surface Mount

Brand

AKER

Height

5.2mm

Length

13mm

Number of Rows

2

Detalji o proizvodu

ADuM3150 Series SPIsolator Digital Isolators, Analog Devices

The ADuM3150 series, from Analog Devices, are 6-channel dedicated isolators for high-speed serial peripheral interfaces (SPIs). They form a part of the Analog Devices’ SPIsolator™ family. The ADuM3150 devices offer retimed clock signal improves timing margin to maximise speed.
Based on the Analog Devices’ iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS SPI bus signals supports SPI clock rates of up to 17 MHz. These channels operate with 14 ns propagation delay and 1 ns jitter to optimize timing for SPI.
The ADuM3150 isolator also provides two additional independent low data rate isolation channels, one channel in each direction. Data in the slow channels is sampled and serialized for a 250 kbps data rate with 2.5 μs of jitter. The ADuM3150 SPIsolator™ supports a delay clock output on the master side of the device. This output can be used with an additional clocked port on the master to support 40 MHz clock performance.
Suitable applications for the ADuM3150 SPIsolator™ include industrial programmable logic controllers (PLC) and sensor isolation.

Digital Isolators, Analog Devices

A comprehensive range of Digital Isolators featuring iCoupler® technology from Analog Devices. These products combine high speed CMOS and monolithic air core transformer technologies to provide outstanding performance characteristics superior to alternative product types such as opto-coupled devices and exhibit superior long-term reliability, stability and longevity.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više