Bartec ComEx Series Emergency Stop Push Button, 30mm Cutout

RS kataloški broj:: 244-3421robna marka: BartecProizvođački broj:: 05-0003-000800
brand-logo
Prikaži sve u Emergency Stop Push Buttons

Tehnička dokumentacija

Tehnički podaci

Brand

Bartec

Cutout Diameter

30mm

Series

ComEx

Push Button Material

Thermoplastic

Push Button Diameter

30mm

Zemlja podrijetla

Germany

Detalji o proizvodu

Switch Actuators

Hazardous Area Actuators & Contact Blocks

Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 181,68

Each (bez PDV-a)

KM 212,57

Each (s PDV-om)

Bartec ComEx Series Emergency Stop Push Button, 30mm Cutout

KM 181,68

Each (bez PDV-a)

KM 212,57

Each (s PDV-om)

Bartec ComEx Series Emergency Stop Push Button, 30mm Cutout
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cijena
1 - 4KM 181,68
5 - 9KM 178,44
10+KM 176,28

Tehnička dokumentacija

Tehnički podaci

Brand

Bartec

Cutout Diameter

30mm

Series

ComEx

Push Button Material

Thermoplastic

Push Button Diameter

30mm

Zemlja podrijetla

Germany

Detalji o proizvodu

Switch Actuators

Hazardous Area Actuators & Contact Blocks

Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.