C & K Black Push Button Cap for Use with KSA & KSL Series Sealed Tact Switch

RS kataloški broj:: 787-4833robna marka: C & KProizvođački broj:: BTN K03 90
brand-logo
Prikaži sve u Push Button Caps

Tehnička dokumentacija

Tehnički podaci

Cap Colour

Black

Accessory Type

Button

Brand

C & K

For Use With

KSA & KSL Series Sealed Tact Switch

Zemlja podrijetla

France

Detalji o proizvodu

Electronic Converter for MR16

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 1,54

Each (bez PDV-a)

KM 1,80

Each (s PDV-om)

C & K Black Push Button Cap for Use with KSA & KSL Series Sealed Tact Switch

1

Dostupno u više komada 1
1KM 1,54
2KM 3,07
3KM 4,61
4KM 6,14
5KM 7,68
6KM 9,21
7KM 10,75
8KM 12,29
9KM 13,82
10KM 14,92
11KM 16,42
12KM 17,91
13KM 19,40
14KM 20,89
15KM 22,39

KM 1,54

Each (bez PDV-a)

KM 1,80

Each (s PDV-om)

C & K Black Push Button Cap for Use with KSA & KSL Series Sealed Tact Switch
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1KM 1,54
2KM 3,07
3KM 4,61
4KM 6,14
5KM 7,68
6KM 9,21
7KM 10,75
8KM 12,29
9KM 13,82
10KM 14,92
11KM 16,42
12KM 17,91
13KM 19,40
14KM 20,89
15KM 22,39

Kupujte na veliko

količinaJedinična cijena
1 - 9KM 1,54
10 - 49KM 1,49
50 - 99KM 1,45
100+KM 1,34

Tehnička dokumentacija

Tehnički podaci

Cap Colour

Black

Accessory Type

Button

Brand

C & K

For Use With

KSA & KSL Series Sealed Tact Switch

Zemlja podrijetla

France

Detalji o proizvodu

Electronic Converter for MR16

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.