EAO Push Button Switch for Use with Series 31 Push Buttons
Tehnička dokumentacija
Tehnički podaci
Brand
EAOAccessory Type
Illuminated Push Button Switch
For Use With
Series 31 Push Buttons
Series
31
IP Rating
IP40
Contact Current Rating
100 mA @ 42 V
Actuator Shape
Rectangular
Actuator Type
Button
Terminal Type
Through Hole
Actuator Diameter
18mm
Mounting Type
PCB
Overall Depth
46.5mm
Actuator Material
Polyamide
Zemlja podrijetla
Switzerland
Detalji o proizvodu
Illuminated Push Button Switch - EAO 31 Series
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Standards
EN 61058
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 97,33
Each (bez PDV-a)
KM 113,88
Each (s PDV-om)
1
KM 97,33
Each (bez PDV-a)
KM 113,88
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 9 | KM 97,33 |
| 10+ | KM 93,00 |
Tehnička dokumentacija
Tehnički podaci
Brand
EAOAccessory Type
Illuminated Push Button Switch
For Use With
Series 31 Push Buttons
Series
31
IP Rating
IP40
Contact Current Rating
100 mA @ 42 V
Actuator Shape
Rectangular
Actuator Type
Button
Terminal Type
Through Hole
Actuator Diameter
18mm
Mounting Type
PCB
Overall Depth
46.5mm
Actuator Material
Polyamide
Zemlja podrijetla
Switzerland
Detalji o proizvodu
Illuminated Push Button Switch - EAO 31 Series
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Standards
EN 61058