Festo Pneumatic Guided Cylinder - 170830, 12mm Bore, 80mm Stroke, DFM Series, Double Acting
Tehnička dokumentacija
Tehnički podaci
Brand
FestoStroke
80mm
Bore
12mm
Manufacturer Series
DFM
Action
Double
Pneumatic Connection
M5
Maximum Operating Pressure
10 bar
Cushioning Type
Elastic
Model Number p
170830
Model Number (p)
170830
Dimensions
135 x 60 x 28mm
Weight
690g
Maximum Operating Temperature
+80°C
Length
135mm
Height
28mm
Minimum Operating Temperature
-20°C
Width
60mm
Zemlja podrijetla
China
Detalji o proizvodu
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 803,41
KM 803,41 Each (bez PDV-a)
KM 939,99
KM 939,99 Each (s PDV-om)
1
KM 803,41
KM 803,41 Each (bez PDV-a)
KM 939,99
KM 939,99 Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
FestoStroke
80mm
Bore
12mm
Manufacturer Series
DFM
Action
Double
Pneumatic Connection
M5
Maximum Operating Pressure
10 bar
Cushioning Type
Elastic
Model Number p
170830
Model Number (p)
170830
Dimensions
135 x 60 x 28mm
Weight
690g
Maximum Operating Temperature
+80°C
Length
135mm
Height
28mm
Minimum Operating Temperature
-20°C
Width
60mm
Zemlja podrijetla
China
Detalji o proizvodu
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.