Tehnička dokumentacija
Tehnički podaci
Brand
onsemiDirection Type
Uni-Directional
Diode Configuration
Single
Minimum Breakdown Voltage
5.5V
Mounting Type
Surface Mount
Package Type
POWERMITE
Pin Count
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimum Operating Temperature
-40 °C
Dimensions
2.05 x 2.18 x 1.15mm
Maximum Operating Temperature
+150 °C
Height
1.15mm
Width
2.18mm
Test Current
1A
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Length
2.05mm
Detalji o proizvodu
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.
Transient Voltage Suppressors, ON Semiconductor
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 1,665
Each (Supplied on a Reel) (bez PDV-a)
KM 1,948
Each (Supplied on a Reel) (s PDV-om)
Proizvodno pakovanje (kolut)
10
KM 1,665
Each (Supplied on a Reel) (bez PDV-a)
KM 1,948
Each (Supplied on a Reel) (s PDV-om)
Proizvodno pakovanje (kolut)
10
Kupujte na veliko
količina | Jedinična cijena | Po kolut |
---|---|---|
10 - 20 | KM 1,665 | KM 16,65 |
30 - 140 | KM 1,601 | KM 16,01 |
150 - 1490 | KM 1,103 | KM 11,03 |
1500+ | KM 0,887 | KM 8,87 |
Tehnička dokumentacija
Tehnički podaci
Brand
onsemiDirection Type
Uni-Directional
Diode Configuration
Single
Minimum Breakdown Voltage
5.5V
Mounting Type
Surface Mount
Package Type
POWERMITE
Pin Count
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimum Operating Temperature
-40 °C
Dimensions
2.05 x 2.18 x 1.15mm
Maximum Operating Temperature
+150 °C
Height
1.15mm
Width
2.18mm
Test Current
1A
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Length
2.05mm
Detalji o proizvodu
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.