RS PRO 4700μF Aluminium Electrolytic Capacitor 63V dc, Radial, Through Hole
![brand-logo](https://media.rs-online.com/brand/M3385-01.jpg)
Tehnička dokumentacija
Tehnički podaci
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
USB Version
USB2.0
Lifetime
2000h
Tolerance
±20%
Lead Pitch
12mm
Dissipation Factor
10%
Voltage
63V dc
Diameter
25mm
Length
44mm
Height
44mm
Ripple Current
2.2A
Capacitance
4700µF
Series
RS
Brand
RS ProDimensions
25 (Dia.) x 44mm
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 18,601
komadno (u pakovanju od 2) (bez PDV-a)
KM 21,763
komadno (u pakovanju od 2) (s PDV-om)
Standard
2
KM 18,601
komadno (u pakovanju od 2) (bez PDV-a)
KM 21,763
komadno (u pakovanju od 2) (s PDV-om)
Standard
2
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
2 - 18 | KM 18,601 | KM 37,20 |
20 - 48 | KM 17,628 | KM 35,26 |
50 - 98 | KM 16,979 | KM 33,96 |
100+ | KM 16,762 | KM 33,52 |
Tehnička dokumentacija
Tehnički podaci
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
USB Version
USB2.0
Lifetime
2000h
Tolerance
±20%
Lead Pitch
12mm
Dissipation Factor
10%
Voltage
63V dc
Diameter
25mm
Length
44mm
Height
44mm
Ripple Current
2.2A
Capacitance
4700µF
Series
RS
Brand
RS ProDimensions
25 (Dia.) x 44mm
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11