Weidmuller1016900000 WTL Series Test Disconnect Terminal Block, 6mm², Single-Level, Screw Termination
Tehnička dokumentacija
Tehnički podaci
Brand
WeidmüllerColour
Dark Beige
Number of Levels
Single
Series
WTL
American Wire Gauge
20 → 8AWG
Termination Method
Screw
Cable CSA
6mm²
Voltage Rating
630 V
Current Rating
57A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+120°C
Standards Met
CSA
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Test/Isolating
This terminal has a 4mm test socket on the input and output side to take standard test leads. The isolating function is actuated by a screw in the orange housing, so it can be slid to open or close and is locked in place by tightening the screw.
Warning
Isolating terminals must only be used for isolating sections of a circuit for test purposes. They must never be used to switch devices on or off when power is applied.
Approvals
CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 18,709
Each (In a Pack of 5) (bez PDV-a)
KM 21,89
Each (In a Pack of 5) (s PDV-om)
5
KM 18,709
Each (In a Pack of 5) (bez PDV-a)
KM 21,89
Each (In a Pack of 5) (s PDV-om)
5
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
5 - 25 | KM 18,709 | KM 93,55 |
30+ | KM 17,952 | KM 89,76 |
Tehnička dokumentacija
Tehnički podaci
Brand
WeidmüllerColour
Dark Beige
Number of Levels
Single
Series
WTL
American Wire Gauge
20 → 8AWG
Termination Method
Screw
Cable CSA
6mm²
Voltage Rating
630 V
Current Rating
57A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+120°C
Standards Met
CSA
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Test/Isolating
This terminal has a 4mm test socket on the input and output side to take standard test leads. The isolating function is actuated by a screw in the orange housing, so it can be slid to open or close and is locked in place by tightening the screw.
Warning
Isolating terminals must only be used for isolating sections of a circuit for test purposes. They must never be used to switch devices on or off when power is applied.
Approvals
CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR