Lathe Tool Holders

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the toolpost.Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one. What are the advantages of lathe tool holders?Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring loaded to deflect the tool if too much force is applied. Uses of lathe tool holdersThere are several additional ways in which lathe tool holders allow greater range of use of tool bits.
  • They can change the angle of the tool bit.
  • They can change the level of overhang in the tool bit.
  • They can direct fluid to the work area.
  • They may deflect the tool bit away from the piece when an excessive load is added.
16
odgovara pretrazi
Napravili ste nove odabire
Kliknite "Primjeni filtre" za pregled Vaših novih proizvoda.
Korišteni uvjeti pretrage
gledate 1 - 16 od 16 rezultata
prikaz:
rezultata po stranici
20
  • 20
  • 50
  • 100
veleprodajna cijena
(bez PDV-a)
detalji proizvoda Approach Angle Stock Series For Use With
Pramet 95° PWLNR/L Lathe Tool Holder for WN.. 0804..Insert
  • kn 1.830,00
  • komadno
  • Usporedi
95° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
13 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
PWLNR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
WN.. 0804..Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet XLCFN Lathe Tool Holder for LFMX 2.00...Insert, LFMX 2.20...Insert
  • kn 1.080,00
  • komadno
  • Usporedi
  • RS kat. broj 866-0354
  • robna marka Pramet
  • Pro. broj XLCFN 2601 J 2.00
- 13 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
XLCFN Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
LFMX 2.00...Insert, LFMX 2.20...Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 95° DCLNR/L Lathe Tool Holder for CN.. 1204..Insert
  • kn 1.190,00
  • komadno
  • Usporedi
95° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
10 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
DCLNR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
CN.. 1204..Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 95° PWLNR/L Lathe Tool Holder for WNM. 0604.. Insert
  • kn 1.190,00
  • komadno
  • Usporedi
  • RS kat. broj 866-0408
  • robna marka Pramet
  • Pro. broj PWLNR 2525 M 0604
95° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
10 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
PWLNR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
WNM. 0604.. Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet XLCFN Lathe Tool Holder for LFMX 2.00...Insert, LFMX 2.20...Insert
  • kn 1.130,00
  • komadno
  • Usporedi
  • RS kat. broj 866-0363
  • robna marka Pramet
  • Pro. broj XLCFN 3201 M 2.00
- 10 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
XLCFN Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
LFMX 2.00...Insert, LFMX 2.20...Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 95° PWLNR/L Lathe Tool Holder for WNM. 0604.. Insert
  • kn 1.130,00
  • komadno
  • Usporedi
  • RS kat. broj 866-0398
  • robna marka Pramet
  • Pro. broj PWLNR 2020 K 0604
95° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
9 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
PWLNR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
WNM. 0604.. Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 95° SCLCR/L Lathe Tool Holder for CC.. 0602..Insert
  • kn 1.340,00
  • komadno
  • Usporedi
95° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
8 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
SCLCR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
CC.. 0602..Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 93° SDJCR/L Lathe Tool Holder for DC.. 11T3..Insert
  • kn 1.090,00
  • komadno
  • Usporedi
93° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
6 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
SDJCR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
DC.. 11T3..Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 107°30' SDQCR/L Lathe Tool Holder for DC.. 11T3..Insert
  • kn 1.760,00
  • komadno
  • Usporedi
107°30' Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
5 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
SDQCR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
DC.. 11T3..Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 90° DTGNR/L Lathe Tool Holder for TN.. 1604..Insert
  • kn 1.130,00
  • komadno
  • Usporedi
90° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
5 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
DTGNR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
TN.. 1604..Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet DU, D Lathe Tool Holder for XLC.N 26..Blade
  • kn 2.260,00
  • komadno
  • Usporedi
- 5 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
DU, D Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
XLC.N 26..Blade Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 93° MTJNR/L Lathe Tool Holder for TN.. 1604..Insert
  • kn 1.120,00
  • komadno
  • Usporedi
93° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
2 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
MTJNR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
TN.. 1604..Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 95° PWLNR/L Lathe Tool Holder for WNM. 0604..Insert
  • kn 3.120,00
  • komadno
  • Usporedi
95° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
2 Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
PWLNR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
WNM. 0604..Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 95° SCLCR/L Lathe Tool Holder for CC.. 09T3..Insert
  • kn 1.420,00
  • komadno
  • Usporedi
95° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
provjerite stanje skladišta SCLCR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
CC.. 09T3..Insert Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet 91° S-CTFPR/L Lathe Tool Holder for CT Inserts
  • kn 1.510,00
  • komadno
  • Usporedi
91° Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
provjerite stanje skladišta S-CTFPR/L Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
CT Inserts Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Pramet DU, D Lathe Tool Holder for XLC.N 32..Blade
  • kn 2.430,00
  • komadno
  • Usporedi
- provjerite stanje skladišta DU, D Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
XLC.N 32..Blade Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Provjerite stanje na skladištima u Velikoj Britaniji.
Upišite željenu količinu i kliknite „Provjera“. Stanje skladišta osvježeno je
Obavijesti se osvježavaju dnevno i dostupnost se može promijeniti u trenutku naručivanja.
RS kataloški br.:
Tražim 
Lista za usporedbu je puna
Možete usporediti samo 8 proizvoda odjednom

Pogledajte ili uklonite proizvode na VašojStranici za usporedbu
gledate 1 - 16 od 16 rezultata