Bartec ComEx Series Emergency Stop Push Button, 30mm Cutout
Tehnička dokumentacija
Tehnički podaci
Proizvođač
BartecCutout Diameter
30mm
Series
ComEx
Push Button Material
Thermoplastic
Hazardous Area Certification
ATEX
Push Button Diameter
30mm
Zemlja podrijetla
Germany
Detalji o proizvodu
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 82,41
komadno (bez PDV-a)
€ 103,01
komadno (s PDV-om)
1
€ 82,41
komadno (bez PDV-a)
€ 103,01
komadno (s PDV-om)
1
Kupujte na veliko
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 82,41 |
| 5 - 9 | € 80,99 |
| 10+ | € 79,97 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
BartecCutout Diameter
30mm
Series
ComEx
Push Button Material
Thermoplastic
Hazardous Area Certification
ATEX
Push Button Diameter
30mm
Zemlja podrijetla
Germany
Detalji o proizvodu
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.