Igus RJUM-03-12, Bearing with 21.8mm Outside Diameter
Tehnička dokumentacija
Tehnički podaci
Proizvođač
IgusInside Diameter
12mm
Outside Diameter
21.8mm
Length
31.9mm
Linear Bearing Type
Linear Plain Bearing
Static Load Rating
6720N
Dynamic Load Rating
960N
Zemlja podrijetla
Germany
Detalji o proizvodu
Self Compensating Bushing - Closed
Self Compensating,Uses a spherical area on the outer casing for self adjustment. Reductions in the load bearing capacity due to the self-adjusting function are thus avoided, because the shaft is always supported on the entire projected surface. Replacement liners are simply pushed into the aluminium housings.
Self-Lubricating Bushes - Drylin™
Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 26,67
komadno (bez PDV-a)
€ 33,34
komadno (s PDV-om)
1
€ 26,67
komadno (bez PDV-a)
€ 33,34
komadno (s PDV-om)
1
Kupujte na veliko
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 26,67 |
| 5+ | € 25,97 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
IgusInside Diameter
12mm
Outside Diameter
21.8mm
Length
31.9mm
Linear Bearing Type
Linear Plain Bearing
Static Load Rating
6720N
Dynamic Load Rating
960N
Zemlja podrijetla
Germany
Detalji o proizvodu
Self Compensating Bushing - Closed
Self Compensating,Uses a spherical area on the outer casing for self adjustment. Reductions in the load bearing capacity due to the self-adjusting function are thus avoided, because the shaft is always supported on the entire projected surface. Replacement liners are simply pushed into the aluminium housings.
Self-Lubricating Bushes - Drylin™
Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.