Phoenix Contact MKDS 1/ 2-3.5 HT BK Series PCB Terminal Block, 2-Contact, 3.5mm Pitch, Through Hole Mount, 1-Row,
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactNumber Of Contacts
2
Pitch
3.5mm
Number Of Rows
1
Mounting Type
Through Hole
Gender
Female
Termination Method
Solder
Current Rating
13.5A
Body Orientation
Horizontal
Boja
Black
Voltage Rating
300 V
Series
MKDS 1/ 2-3.5 HT BK
Length
7.3mm
Material
Nylon
Width
7.5mm
Zemlja podrijetla
Germany
Detalji o proizvodu
Phoenix Contact COMBICON MKDS 3.5mm High Temperature PCB Terminal Block
COMBICON MKD S PCB terminal blocks are reflow solder tolerable and enable a greater proportion of a PCB to be populated and reflow soldered in one operation. Before being used in reflow oven, it is recommended that these components are heat treated at +125°C for 48 hrs prior to use.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 9,00
€ 1,80 komadno (u pakiranju od 5) (bez PDV-a)
€ 11,25
€ 2,25 komadno (u pakiranju od 5) (s PDV-om)
5
€ 9,00
€ 1,80 komadno (u pakiranju od 5) (bez PDV-a)
€ 11,25
€ 2,25 komadno (u pakiranju od 5) (s PDV-om)
5
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 5 - 120 | € 1,80 | € 9,00 |
| 125 - 370 | € 1,65 | € 8,25 |
| 375 - 995 | € 1,53 | € 7,65 |
| 1000 - 1995 | € 1,40 | € 7,00 |
| 2000+ | € 1,34 | € 6,70 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Phoenix ContactNumber Of Contacts
2
Pitch
3.5mm
Number Of Rows
1
Mounting Type
Through Hole
Gender
Female
Termination Method
Solder
Current Rating
13.5A
Body Orientation
Horizontal
Boja
Black
Voltage Rating
300 V
Series
MKDS 1/ 2-3.5 HT BK
Length
7.3mm
Material
Nylon
Width
7.5mm
Zemlja podrijetla
Germany
Detalji o proizvodu
Phoenix Contact COMBICON MKDS 3.5mm High Temperature PCB Terminal Block
COMBICON MKD S PCB terminal blocks are reflow solder tolerable and enable a greater proportion of a PCB to be populated and reflow soldered in one operation. Before being used in reflow oven, it is recommended that these components are heat treated at +125°C for 48 hrs prior to use.