PR Electronics 5 Series Signal Conditioner
Tehnička dokumentacija
Tehnički podaci
Proizvođač
PR ElectronicsInput Range
10 MΩ, 10 Ω, 0 → 100 mA, 0 → 250V dc
Signal Conditioner Type
Analogue to Current
Minimum Operating Temperature
-20°C
Minimum Operating Temperature
-20°C
Series
5
Supply Voltage
19.2 → 300 V dc, 21.6 → 253 V ac
Supply Voltage
19.2 → 300 V dc, 21.6 → 253 V ac
Zemlja podrijetla
Denmark
Detalji o proizvodu
PR Electronics 5116A Programmable Transmitter
PR Electronics 5116A programmable transmitter for linearizing electronic temperature measurement. With a wide variety of configurable inputs for current/voltage or temperature and conversion of linear resistance the 5116 transmitters are suitable for a wide range of temperature measurement applications.
The 5116A transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5116A signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.
PR Electronics DIN Rail Mounting
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
PR ElectronicsInput Range
10 MΩ, 10 Ω, 0 → 100 mA, 0 → 250V dc
Signal Conditioner Type
Analogue to Current
Minimum Operating Temperature
-20°C
Minimum Operating Temperature
-20°C
Series
5
Supply Voltage
19.2 → 300 V dc, 21.6 → 253 V ac
Supply Voltage
19.2 → 300 V dc, 21.6 → 253 V ac
Zemlja podrijetla
Denmark
Detalji o proizvodu
PR Electronics 5116A Programmable Transmitter
PR Electronics 5116A programmable transmitter for linearizing electronic temperature measurement. With a wide variety of configurable inputs for current/voltage or temperature and conversion of linear resistance the 5116 transmitters are suitable for a wide range of temperature measurement applications.
The 5116A transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5116A signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.
PR Electronics DIN Rail Mounting