RS PRO E10 Indicator Light, Clear, 130 V, 20 mA, 3000h
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProVoltage Rating
130 V
Lamp Base
E10
Current Rating
20 mA
Diameter
10mm
Lamp Size
T3 1/4
Length
28 mm
Lens Colour
Clear
Luminosity
3 lm
Life Hours
3000h
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 2,45
komadno (u pakiranju od 10) (bez PDV-a)
€ 3,062
komadno (u pakiranju od 10) (s PDV-om)
10
€ 2,45
komadno (u pakiranju od 10) (bez PDV-a)
€ 3,062
komadno (u pakiranju od 10) (s PDV-om)
10
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 10 - 90 | € 2,45 | € 24,50 |
| 100 - 490 | € 2,25 | € 22,50 |
| 500 - 990 | € 1,96 | € 19,60 |
| 1000+ | € 1,90 | € 19,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProVoltage Rating
130 V
Lamp Base
E10
Current Rating
20 mA
Diameter
10mm
Lamp Size
T3 1/4
Length
28 mm
Lens Colour
Clear
Luminosity
3 lm
Life Hours
3000h
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.