TE Connectivity, DuraSeal Insulated Ring Terminal, M4 Stud Size, 1.5mm² to 2.5mm² Wire Size, Blue
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivitySeries
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Minimum Wire Size mm²
1.5mm²
Maximum Wire Size mm²
2.5mm²
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Stud Size
M4
Boja
Blue
Contact Plating
Tin
Contact Material
Copper
Overall Length
33.02mm
Zemlja podrijetla
Mexico
Detalji o proizvodu
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 44,85
1 kutija od 25 (bez PDV-a)
€ 56,06
1 kutija od 25 (s PDV-om)
1
€ 44,85
1 kutija od 25 (bez PDV-a)
€ 56,06
1 kutija od 25 (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivitySeries
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Minimum Wire Size mm²
1.5mm²
Maximum Wire Size mm²
2.5mm²
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Stud Size
M4
Boja
Blue
Contact Plating
Tin
Contact Material
Copper
Overall Length
33.02mm
Zemlja podrijetla
Mexico
Detalji o proizvodu
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed