TE Connectivity Adhesive Lined Heat Shrink Tubing, Black 7.4mm Sleeve Dia. x 1220mm Length 4:1 Ratio, ES2000 Series
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivitySleeve Diameter
7.4mm
Boja
Black
Shrunk Diameter
1.65mm
Sleeve Type
Heat Shrink
Adhesive Lined
Yes
Shrink Ratio
4:1
Sleeve Length
1220mm
Material
Irradiated Polyolefin
Operating Temperature Range
-40 → +130 °C
Flame Retardant
Yes
Series
ES2000
Standards Met
EU ELV Compliant, UL Recognised
Detalji o proizvodu
ES2000 Dual Wall Heat Shrink Tubing
The outer jacket of the ES2000 heat shrink is made from radiation-crosslinked, semi-rigid polyolefin. It is flame-retardant and mechanically tough. The jacket also provides strain relief and abrasion protection of wire splices and mechanically sensitive components.
The adhesive inner layer is specially formulated to adhere to all major types of automotive wire insulation and to perform well at an extended temperature range.
The adhesive forms an effective barrier against automotive fluids and moisture, helping to protect the harness from the effects of corrosion and water wicking.
ES2000 tubing dimensions have been engineered to provide low-cost sealing solutions on multiple wire splices, using standard TE Connectivity application equipment.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 10,21
komadno (u pakiranju od 50) (bez PDV-a)
€ 12,762
komadno (u pakiranju od 50) (s PDV-om)
50
€ 10,21
komadno (u pakiranju od 50) (bez PDV-a)
€ 12,762
komadno (u pakiranju od 50) (s PDV-om)
50
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivitySleeve Diameter
7.4mm
Boja
Black
Shrunk Diameter
1.65mm
Sleeve Type
Heat Shrink
Adhesive Lined
Yes
Shrink Ratio
4:1
Sleeve Length
1220mm
Material
Irradiated Polyolefin
Operating Temperature Range
-40 → +130 °C
Flame Retardant
Yes
Series
ES2000
Standards Met
EU ELV Compliant, UL Recognised
Detalji o proizvodu
ES2000 Dual Wall Heat Shrink Tubing
The outer jacket of the ES2000 heat shrink is made from radiation-crosslinked, semi-rigid polyolefin. It is flame-retardant and mechanically tough. The jacket also provides strain relief and abrasion protection of wire splices and mechanically sensitive components.
The adhesive inner layer is specially formulated to adhere to all major types of automotive wire insulation and to perform well at an extended temperature range.
The adhesive forms an effective barrier against automotive fluids and moisture, helping to protect the harness from the effects of corrosion and water wicking.
ES2000 tubing dimensions have been engineered to provide low-cost sealing solutions on multiple wire splices, using standard TE Connectivity application equipment.