Time Electronics 7006, 20mA Loop Calibrator - RS Calibration
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Time ElectronicsCalibrated
RSCAL
Absolute Maximum Current Measurement
20mA
Best Accuracy
±0.1 %
Battery Type
PP3
Battery Life
40 h
Power Source
Battery
Weight
180g
Height
140mm
Length
30mm
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-5°C
Width
65mm
Model Number p
7006
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
Calibration type
RS umjeravanje
1
P.O.A.
Calibration type
RS umjeravanje
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Time ElectronicsCalibrated
RSCAL
Absolute Maximum Current Measurement
20mA
Best Accuracy
±0.1 %
Battery Type
PP3
Battery Life
40 h
Power Source
Battery
Weight
180g
Height
140mm
Length
30mm
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-5°C
Width
65mm
Model Number p
7006
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual