Vishay 20kΩ Thin Film Resistor 0.4W ±1% MRS16000C2002FCT00
Tehnička dokumentacija
Tehnički podaci
Proizvođač
VishayResistance
20kΩ
Power Rating
0.4W
Tolerance
±1%
Technology
Thin Film
Series
MRS16
Temperature Coefficient
±50ppm/°C
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
0.4W MRS16 Series
A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper are welded to the end-caps. The resistors are coated with lacquer which provides electrical, mechanical, and climatic protection. Four or five colour code rings designate the resistance value and tolerance according to IEC 60062.
Axial, 0.25W - 0.4W
High stability metal film resistors. Extremely low current-noise level with low temperature coefficient and close tolerance.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 0,22
komadno (u pakiranju od 25) (bez PDV-a)
€ 0,275
komadno (u pakiranju od 25) (s PDV-om)
Standard
25
€ 0,22
komadno (u pakiranju od 25) (bez PDV-a)
€ 0,275
komadno (u pakiranju od 25) (s PDV-om)
Standard
25
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 25 - 225 | € 0,22 | € 5,50 |
| 250+ | € 0,09 | € 2,25 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
VishayResistance
20kΩ
Power Rating
0.4W
Tolerance
±1%
Technology
Thin Film
Series
MRS16
Temperature Coefficient
±50ppm/°C
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
0.4W MRS16 Series
A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper are welded to the end-caps. The resistors are coated with lacquer which provides electrical, mechanical, and climatic protection. Four or five colour code rings designate the resistance value and tolerance according to IEC 60062.
Axial, 0.25W - 0.4W
High stability metal film resistors. Extremely low current-noise level with low temperature coefficient and close tolerance.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda