TE Connectivity Splice Connector, Red, Insulated, Nickel 26 → 20 AWG
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityWire Size
26 → 20 AWG
Overall Length
27.94mm
Diameter
2.03mm
Insulation
Insulated
Colour
Red
Insulation Material
Modified Polyvinylidene
Contact Material
Copper Alloy
Contact Plating
Nickel
Zemlja podrijetla
Mexico
Detalji o proizvodu
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp In-Line Butt Splices
MiniSeal high performance immersion-resistant crimp in-line butt splices consisting of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve made from radiation cross-linked polyvinylidene fluoride. These MiniSeal™ crimp splices are environmentally sealed and maintain the quality of the electrical connection and seal the splice against corrosion, galvanic action over time and exposure to harsh environments. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft and aerospace vehicles, or similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used
For wire sizes and splice configurations please see table.
Splices
€ 670,00
€ 6,70 Each (In a Box of 100) (bez PDV-a)
€ 783,90
€ 7,839 Each (In a Box of 100) (s PDV-om)
100
€ 670,00
€ 6,70 Each (In a Box of 100) (bez PDV-a)
€ 783,90
€ 7,839 Each (In a Box of 100) (s PDV-om)
100
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityWire Size
26 → 20 AWG
Overall Length
27.94mm
Diameter
2.03mm
Insulation
Insulated
Colour
Red
Insulation Material
Modified Polyvinylidene
Contact Material
Copper Alloy
Contact Plating
Nickel
Zemlja podrijetla
Mexico
Detalji o proizvodu
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp In-Line Butt Splices
MiniSeal high performance immersion-resistant crimp in-line butt splices consisting of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve made from radiation cross-linked polyvinylidene fluoride. These MiniSeal™ crimp splices are environmentally sealed and maintain the quality of the electrical connection and seal the splice against corrosion, galvanic action over time and exposure to harsh environments. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft and aerospace vehicles, or similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used
For wire sizes and splice configurations please see table.