Greenwich Instruments GSM 2 Stepper Motor Controller 2 A, 61 x 46 x 15mm

RS kataloški broj:: 240-7920brend: Greenwich InstrumentsProizvođački broj:: GSM 2
Prikaži sve u Motor Controllers

Tehnička dokumentacija

Tehnički podaci

Current Rating

2 A

Overall Length

61mm

Overall Width

46mm

Overall Depth

15mm

Zemlja podrijetla

United Kingdom

Detalji o proizvodu

GSM2 Stepper Motor Drive Board

The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.

Supplied with

User instructions

Možda će vas interesovati
Informacije o stanju skladišta trenutno nisu dostupne.

RSD 34.691

RSD 34.691 Each (bez PDV-a)

RSD 41.630

RSD 41.630 Each (s PDV-om)

Greenwich Instruments GSM 2 Stepper Motor Controller 2 A, 61 x 46 x 15mm

RSD 34.691

RSD 34.691 Each (bez PDV-a)

RSD 41.630

RSD 41.630 Each (s PDV-om)

Greenwich Instruments GSM 2 Stepper Motor Controller 2 A, 61 x 46 x 15mm
Informacije o stanju skladišta trenutno nisu dostupne.

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Možda će vas interesovati

Tehnička dokumentacija

Tehnički podaci

Current Rating

2 A

Overall Length

61mm

Overall Width

46mm

Overall Depth

15mm

Zemlja podrijetla

United Kingdom

Detalji o proizvodu

GSM2 Stepper Motor Drive Board

The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.

Supplied with

User instructions

Možda će vas interesovati