Phoenix Contact 3031487 ST 6 Series Grey, 0.2 → 6mm², Single-Level, Feed Through Termination
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
Voltage Rating
1 kV
American Wire Gauge
24 → 8AWG
Series
ST 6
Termination Method
Feed Through
Cable CSA
0.2 → 6mm²
Current Rating
41A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+110°C
Standards Met
IEC 60947-7-1
Model Number
ST 6
Zemlja podrijetla
Germany
Detalji o proizvodu
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
€ 13,15
€ 2,63 Each (In a Pack of 5) (bez PDV-a)
€ 15,39
€ 3,077 Each (In a Pack of 5) (s PDV-om)
5
€ 13,15
€ 2,63 Each (In a Pack of 5) (bez PDV-a)
€ 15,39
€ 3,077 Each (In a Pack of 5) (s PDV-om)
5
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
Voltage Rating
1 kV
American Wire Gauge
24 → 8AWG
Series
ST 6
Termination Method
Feed Through
Cable CSA
0.2 → 6mm²
Current Rating
41A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+110°C
Standards Met
IEC 60947-7-1
Model Number
ST 6
Zemlja podrijetla
Germany
Detalji o proizvodu
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².