TE Connectivity Straight, Fluid Resistant Elastomer, 25mm

RS kataloški broj:: 718-3313Pbrend: TE ConnectivityProizvođački broj:: 202K232-25-0
brand-logo
Prikaži sve u Heat Shrink Boots

Tehnička dokumentacija

Tehnički podaci

Brand

TE Connectivity

Type

Straight

Inside Diameter Primary

25mm

Inside Diameter Secondary

8mm

Adhesive Lined

No

Material

Fluid Resistant Elastomer

Number of Breakouts

1

Minimum Operating Temperature

-75°C

Maximum Operating Temperature

+150°C

Shrunk Diameter Primary

13.8mm

Shrunk Diameter Secondary

3.3mm

Series

202K2

Detalji o proizvodu

General Purpose (Lipped) - 202K1 and 222K1 Series

Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 60.745

RSD 4.050 komad (isporučivo u vrećici) (bez PDV-a)

RSD 72.894

RSD 4.860 komad (isporučivo u vrećici) (s PDV-om)

TE Connectivity Straight, Fluid Resistant Elastomer, 25mm
Odaberite vrstu pakovanja

Proizvodno pakovanje (kesa)

Odaberite vrstu pakovanja

Standard - each

Dostupno u više komada 1.

Proizvodnja -

Dostupno u više komada 1.

Preporuča se za narudžbu u velikim količinama. Predmeti su pakirani spremni za umetanje u mašine, omogućujući vam da poboljšate učinkovitost proizvodnje.

15

Dostupno u više komada 1
15RSD 60.745
16RSD 64.795
17RSD 68.845
18RSD 72.894
19RSD 76.944
20RSD 80.994
21RSD 85.043
22RSD 89.093
23RSD 93.143
24RSD 97.192
25RSD 101.242
26RSD 105.292
27RSD 109.341
28RSD 113.391
29RSD 117.441

RSD 60.745

RSD 4.050 komad (isporučivo u vrećici) (bez PDV-a)

RSD 72.894

RSD 4.860 komad (isporučivo u vrećici) (s PDV-om)

TE Connectivity Straight, Fluid Resistant Elastomer, 25mm
Informacije o stanju skladišta trenutno nisu dostupne.
Odaberite vrstu pakovanja

Proizvodno pakovanje (kesa)

Odaberite vrstu pakovanja

Standard - each

Dostupno u više komada 1.

Proizvodnja -

Dostupno u više komada 1.

Preporuča se za narudžbu u velikim količinama. Predmeti su pakirani spremni za umetanje u mašine, omogućujući vam da poboljšate učinkovitost proizvodnje.

15

Dostupno u više komada 1
15RSD 60.745
16RSD 64.795
17RSD 68.845
18RSD 72.894
19RSD 76.944
20RSD 80.994
21RSD 85.043
22RSD 89.093
23RSD 93.143
24RSD 97.192
25RSD 101.242
26RSD 105.292
27RSD 109.341
28RSD 113.391
29RSD 117.441

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Tehnička dokumentacija

Tehnički podaci

Brand

TE Connectivity

Type

Straight

Inside Diameter Primary

25mm

Inside Diameter Secondary

8mm

Adhesive Lined

No

Material

Fluid Resistant Elastomer

Number of Breakouts

1

Minimum Operating Temperature

-75°C

Maximum Operating Temperature

+150°C

Shrunk Diameter Primary

13.8mm

Shrunk Diameter Secondary

3.3mm

Series

202K2

Detalji o proizvodu

General Purpose (Lipped) - 202K1 and 222K1 Series

Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.