Dymo Heat Shrink Tubing, Yellow 9mm Sleeve Dia. x 1.5m Length 3:1 Ratio, DYMO Series
Tehnička dokumentacija
Tehnički podaci
Brand
DymoSleeve Diameter
9mm
Colour
Yellow
Shrunk Diameter
1.7mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
1.5m
Material
Polyolefin
Operating Temperature Range
Maximum of +125 °C
Flame Retardant
Yes
Better World Claim
Recycled materials
Better World Product (Saznajte više ...)
Yes
Series
DYMO
Zemlja podrijetla
Belgium
Detalji o proizvodu
Heat Shrink Tubing
DYMO’s heat shrink polyolefin tubes have been designed to offer a permanent solution to both cable identification and protection. The tubes can be directly printed on with any DYMO industrial labelling tool and remain legible even when exposed to solvents, fuels and oils. The printed sleeves are then applied before connection and are permanently secured after connection when shrunk with a heat gun.
Standards
MIL-DTL-23053/5 classes 1 and 3
RSD 11.339
RSD 11.339 Each (bez PDV-a)
RSD 13.607
RSD 13.607 Each (s PDV-om)
1
RSD 11.339
RSD 11.339 Each (bez PDV-a)
RSD 13.607
RSD 13.607 Each (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | Jedinična cena |
|---|---|
| 1 - 9 | RSD 11.339 |
| 10 - 29 | RSD 10.926 |
| 30+ | RSD 10.789 |
Tehnička dokumentacija
Tehnički podaci
Brand
DymoSleeve Diameter
9mm
Colour
Yellow
Shrunk Diameter
1.7mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
1.5m
Material
Polyolefin
Operating Temperature Range
Maximum of +125 °C
Flame Retardant
Yes
Better World Claim
Recycled materials
Better World Product (Saznajte više ...)
Yes
Series
DYMO
Zemlja podrijetla
Belgium
Detalji o proizvodu
Heat Shrink Tubing
DYMO’s heat shrink polyolefin tubes have been designed to offer a permanent solution to both cable identification and protection. The tubes can be directly printed on with any DYMO industrial labelling tool and remain legible even when exposed to solvents, fuels and oils. The printed sleeves are then applied before connection and are permanently secured after connection when shrunk with a heat gun.
Standards
MIL-DTL-23053/5 classes 1 and 3