Tehnička dokumentacija
Tehnički podaci
Brand
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Mounting Type
Through Hole
Magnetic Type
Bipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Height
3.02mm
Dimensions
4.09 x 1.52 x 3.02mm
Minimum Operating Temperature
-40 °C
Pin Count
3
Maximum Operating Temperature
+150 °C
Package Type
SIP
Typical Magnetic Sensor Hysteresis
45 Gs
Detalji o proizvodu
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
Hall Effect Sensors, Allegro MicroSystems
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 1,54
komadno (isporučuje se u vrećici) (bez PDV-a)
€ 1,802
komadno (isporučuje se u vrećici) (s PDV-om)
5
€ 1,54
komadno (isporučuje se u vrećici) (bez PDV-a)
€ 1,802
komadno (isporučuje se u vrećici) (s PDV-om)
5
Kupujte na veliko
količina | Jedinična cijena | Po kesa |
---|---|---|
5 - 20 | € 1,54 | € 7,70 |
25 - 95 | € 1,23 | € 6,15 |
100 - 245 | € 1,06 | € 5,30 |
250+ | € 0,98 | € 4,90 |
Tehnička dokumentacija
Tehnički podaci
Brand
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Mounting Type
Through Hole
Magnetic Type
Bipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Height
3.02mm
Dimensions
4.09 x 1.52 x 3.02mm
Minimum Operating Temperature
-40 °C
Pin Count
3
Maximum Operating Temperature
+150 °C
Package Type
SIP
Typical Magnetic Sensor Hysteresis
45 Gs
Detalji o proizvodu
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.