Tehnička dokumentacija
Tehnički podaci
Brand
onsemiDiode Configuration
Single
Direction Type
Uni-Directional
Minimum Breakdown Voltage
5.5V
Mounting Type
Surface Mount
Package Type
POWERMITE
Pin Count
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimum Operating Temperature
-40 °C
Dimensions
2.05 x 2.18 x 1.15mm
Maximum Operating Temperature
+150 °C
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Length
2.05mm
Height
1.15mm
Width
2.18mm
Test Current
1A
Detalji o proizvodu
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.
Transient Voltage Suppressors, ON Semiconductor
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 0,75
komadno ( isporučuje se kao traka) (bez PDV-a)
€ 0,878
komadno ( isporučuje se kao traka) (s PDV-om)
Standard
10
€ 0,75
komadno ( isporučuje se kao traka) (bez PDV-a)
€ 0,878
komadno ( isporučuje se kao traka) (s PDV-om)
Standard
10
Kupujte na veliko
količina | Jedinična cijena | Po traka |
---|---|---|
10 - 20 | € 0,75 | € 7,50 |
30 - 140 | € 0,72 | € 7,20 |
150 - 740 | € 0,51 | € 5,10 |
750 - 1490 | € 0,50 | € 5,00 |
1500+ | € 0,40 | € 4,00 |
Tehnička dokumentacija
Tehnički podaci
Brand
onsemiDiode Configuration
Single
Direction Type
Uni-Directional
Minimum Breakdown Voltage
5.5V
Mounting Type
Surface Mount
Package Type
POWERMITE
Pin Count
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimum Operating Temperature
-40 °C
Dimensions
2.05 x 2.18 x 1.15mm
Maximum Operating Temperature
+150 °C
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Length
2.05mm
Height
1.15mm
Width
2.18mm
Test Current
1A
Detalji o proizvodu
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.