Phoenix Contact3036385 Fused DIN Rail Terminal, 1-Level, Spring Clamp Termination, Fused
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactColour
Black
Number of Levels
1
American Wire Gauge
28 → 10AWG
Termination Method
Spring Clamp
Fused
Yes
Voltage Rating
500 V
Current Rating
10A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+120°C
Standards Met
EAC
Model Number
ST 4-HESI (6,3X32)
Detalji o proizvodu
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 7,95
Each (bez PDV-a)
€ 9,30
Each (s PDV-om)
1
€ 7,95
Each (bez PDV-a)
€ 9,30
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 24 | € 7,95 |
| 25+ | € 7,85 |
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactColour
Black
Number of Levels
1
American Wire Gauge
28 → 10AWG
Termination Method
Spring Clamp
Fused
Yes
Voltage Rating
500 V
Current Rating
10A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+120°C
Standards Met
EAC
Model Number
ST 4-HESI (6,3X32)
Detalji o proizvodu
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².