RS PRO Black Disconnect Terminal Block, Single-Level, Screw Termination
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProColour
Black
Number of Levels
Single
American Wire Gauge
22 → 11AWG
Series
17150.4
Termination Method
Screw
Voltage Rating
600 V
Current Rating
10 (IEC) A, 16 (cUL) A, 16 (UL) A
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+140°C
Detalji o proizvodu
SSIK Series Fuse-Disconnect Terminals
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced polyamide PA 6.6 V0, have an extended temperature range up to +140°C (RTI elec.) and open up new application possibilities in electrical engineering. They have good dimensional stability up to high temperature ranges.
The SSIK fuse-disconnect terminals feature an extraction lever that locks into its end position and allows a spare fuse to be attached from the side. The following micro-fuses can be attached: SSIC 4 (5x20/5x25/5x30) and SSIC 6 (6.3x25/6.3x32)
Two cross-connection channels within the fuse-disconnect terminals allow for potentials to be distributed to adjacent fused and feed-through terminals from the SRK series. For multiplying the potentials, we offer the SQI standard accessory, available with from 2 to 30 poles. An additional connection (an SMAG) can also be attached to the outlet side. Two or three extraction levers can be coupled and operated simultaneously by using the VBS connection sleeves.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 10,25
Each (bez PDV-a)
€ 11,99
Each (s PDV-om)
1
€ 10,25
Each (bez PDV-a)
€ 11,99
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProColour
Black
Number of Levels
Single
American Wire Gauge
22 → 11AWG
Series
17150.4
Termination Method
Screw
Voltage Rating
600 V
Current Rating
10 (IEC) A, 16 (cUL) A, 16 (UL) A
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+140°C
Detalji o proizvodu
SSIK Series Fuse-Disconnect Terminals
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced polyamide PA 6.6 V0, have an extended temperature range up to +140°C (RTI elec.) and open up new application possibilities in electrical engineering. They have good dimensional stability up to high temperature ranges.
The SSIK fuse-disconnect terminals feature an extraction lever that locks into its end position and allows a spare fuse to be attached from the side. The following micro-fuses can be attached: SSIC 4 (5x20/5x25/5x30) and SSIC 6 (6.3x25/6.3x32)
Two cross-connection channels within the fuse-disconnect terminals allow for potentials to be distributed to adjacent fused and feed-through terminals from the SRK series. For multiplying the potentials, we offer the SQI standard accessory, available with from 2 to 30 poles. An additional connection (an SMAG) can also be attached to the outlet side. Two or three extraction levers can be coupled and operated simultaneously by using the VBS connection sleeves.