Tehnička dokumentacija
Tehnički podaci
Brand
LumbergSeries
Minimodul
Pitch
2.5mm
Number Of Contacts
8
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
5.0A
Voltage Rating
160.0 V
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Minimodul Horizontal Headers
These Lumberg Minimodul™ horizontal pin headers mate with crimp contact housings (3114 Series) for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").
€ 185,00
€ 0,74 Each (In a Box of 250) (bez PDV-a)
€ 216,45
€ 0,866 Each (In a Box of 250) (s PDV-om)
250
€ 185,00
€ 0,74 Each (In a Box of 250) (bez PDV-a)
€ 216,45
€ 0,866 Each (In a Box of 250) (s PDV-om)
250
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
količina | Jedinična cijena | Po kutija |
---|---|---|
250 - 250 | € 0,74 | € 185,00 |
500+ | € 0,71 | € 177,50 |
Tehnička dokumentacija
Tehnički podaci
Brand
LumbergSeries
Minimodul
Pitch
2.5mm
Number Of Contacts
8
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
5.0A
Voltage Rating
160.0 V
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Minimodul Horizontal Headers
These Lumberg Minimodul™ horizontal pin headers mate with crimp contact housings (3114 Series) for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").