Festo Brass 2 Way, Ball Valve, G 3/4in, 20mm, -0.95 → 30bar Operating Pressure
Tehnička dokumentacija
Tehnički podaci
Handle Material
Aluminium
Operating Pressure
-0.95 → 30bar
Handle Colour
Blue
Ball Material
Hard Chrome
Safe for Use With
Air, Vacuum, Water
Handle Type
Lever
Thread Standard
G
Maximum Working Pressure bar
30bar
Attachment Type
Threaded
Body Material
Brass
Maximum Working Pressure psi
725psi
Compression Fitting Size
20mm
Thread Size
3/4in
Type
2 Way
Brand
FestoZemlja podrijetla
Italy
Detalji o proizvodu
Adafruit Feather 32u4 Basic Proto Board
The Adafruit Feather 32u4 Basic Proto has all the basic features shared by all the Feather 32u4 range together with a small prototyping area. In simple projects where you would like to attach a button or sensor, you could skip on a breadboard and wire it directly on to the board.
Adafruit Feather 32u4 Development Boards
The Feather 32u4 is a range of development boards from Adafruit. They are powered by the Atmel ATmega32u4 microcontroller clocked at 8 MHz with 3.3 V logic. This chip has 32K of flash and 2K of RAM and built-in USB. As a result it has a USB-to-Serial programme and debug capability built in and it can also act like a mouse, keyboard, USB MIDI device.
This chip is supported in the Arduino IDE and can run nearly every sensor/library available.
The Feather is perfect for small or portable projects. There is a connector for 3.7 V Lithium polymer batteries and built-in battery charging circuit which you can use to measure and monitor battery levels. Lithium Polymer battery and USB cable not included.
Supplied fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 72,00
Each (bez PDV-a)
€ 84,24
Each (s PDV-om)
1
€ 72,00
Each (bez PDV-a)
€ 84,24
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 4 | € 72,00 |
| 5+ | € 70,50 |
Tehnička dokumentacija
Tehnički podaci
Handle Material
Aluminium
Operating Pressure
-0.95 → 30bar
Handle Colour
Blue
Ball Material
Hard Chrome
Safe for Use With
Air, Vacuum, Water
Handle Type
Lever
Thread Standard
G
Maximum Working Pressure bar
30bar
Attachment Type
Threaded
Body Material
Brass
Maximum Working Pressure psi
725psi
Compression Fitting Size
20mm
Thread Size
3/4in
Type
2 Way
Brand
FestoZemlja podrijetla
Italy
Detalji o proizvodu
Adafruit Feather 32u4 Basic Proto Board
The Adafruit Feather 32u4 Basic Proto has all the basic features shared by all the Feather 32u4 range together with a small prototyping area. In simple projects where you would like to attach a button or sensor, you could skip on a breadboard and wire it directly on to the board.
Adafruit Feather 32u4 Development Boards
The Feather 32u4 is a range of development boards from Adafruit. They are powered by the Atmel ATmega32u4 microcontroller clocked at 8 MHz with 3.3 V logic. This chip has 32K of flash and 2K of RAM and built-in USB. As a result it has a USB-to-Serial programme and debug capability built in and it can also act like a mouse, keyboard, USB MIDI device.
This chip is supported in the Arduino IDE and can run nearly every sensor/library available.
The Feather is perfect for small or portable projects. There is a connector for 3.7 V Lithium polymer batteries and built-in battery charging circuit which you can use to measure and monitor battery levels. Lithium Polymer battery and USB cable not included.
Supplied fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE.