Tehnička dokumentacija
Tehnički podaci
Brand
ifm electronicMedia Monitored
Gas, Liquid
Device Type
Modular Flow Monitoring
Minimum Flow Rate
200 (Gases) ccm/s, 3 (Liquids) ccm/s
Maximum Flow Rate
300 (Liquids) cm³/s, 3000 (Gases) cm³/s
Connection Type
M18 x 1.5
Maximum Pressure
300bar
Material
Stainless Steel
Minimum Media Temperature
-25 (Gases) °C, -25 (Liquids) °C
Maximum Media Temperature
+80°C
Series
SF5
Zemlja podrijetla
Germany
Detalji o proizvodu
Flow sensors type SF5
In applications where it is not possible to use flow sensors with integrated evaluation, sensors are used with evaluation units. Examples include hazardous areas, confined spaces or if flow values are to be indicated in a decentralised manner. Sensors with ceramic housing can be used in aggressive media.
The product range comprises evaluation units for control cabinet installation or local mounting. Depending on the unit, it is possible to monitor flow, temperature and/or wire break. All units indicate the flow with an LED bar graph.
The evaluation units for local mounting are connected to the flow sensor directly at the measuring point using an M12 connector.
Sensors and evaluation systems are designed and approved for use in hazardous areas according to the applicable directives.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 345,70
Each (bez PDV-a)
€ 404,47
Each (s PDV-om)
1
€ 345,70
Each (bez PDV-a)
€ 404,47
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
ifm electronicMedia Monitored
Gas, Liquid
Device Type
Modular Flow Monitoring
Minimum Flow Rate
200 (Gases) ccm/s, 3 (Liquids) ccm/s
Maximum Flow Rate
300 (Liquids) cm³/s, 3000 (Gases) cm³/s
Connection Type
M18 x 1.5
Maximum Pressure
300bar
Material
Stainless Steel
Minimum Media Temperature
-25 (Gases) °C, -25 (Liquids) °C
Maximum Media Temperature
+80°C
Series
SF5
Zemlja podrijetla
Germany
Detalji o proizvodu
Flow sensors type SF5
In applications where it is not possible to use flow sensors with integrated evaluation, sensors are used with evaluation units. Examples include hazardous areas, confined spaces or if flow values are to be indicated in a decentralised manner. Sensors with ceramic housing can be used in aggressive media.
The product range comprises evaluation units for control cabinet installation or local mounting. Depending on the unit, it is possible to monitor flow, temperature and/or wire break. All units indicate the flow with an LED bar graph.
The evaluation units for local mounting are connected to the flow sensor directly at the measuring point using an M12 connector.
Sensors and evaluation systems are designed and approved for use in hazardous areas according to the applicable directives.