KTR Gear Coupling, 65mm Outside Diameter, 42mm Bore Coupler
Tehnička dokumentacija
Tehnički podaci
Brand
KTRCoupling Types
Gear coupling
Bore
42mm
Outside Diameter
65mm
Torque Rating
300Nm
Misalignment - Angular
0.6°
Misalignment - Parallel
0.25mm
Zemlja podrijetla
Germany
Detalji o proizvodu
Bowex M Tooth Gear Coupling Hub
BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear.
The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance.
Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise.
BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.
The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.
Approvals
Atex
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 99,94
Each (bez PDV-a)
€ 116,93
Each (s PDV-om)
1
€ 99,94
Each (bez PDV-a)
€ 116,93
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 4 | € 99,94 |
| 5+ | € 97,32 |
Tehnička dokumentacija
Tehnički podaci
Brand
KTRCoupling Types
Gear coupling
Bore
42mm
Outside Diameter
65mm
Torque Rating
300Nm
Misalignment - Angular
0.6°
Misalignment - Parallel
0.25mm
Zemlja podrijetla
Germany
Detalji o proizvodu
Bowex M Tooth Gear Coupling Hub
BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear.
The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance.
Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise.
BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.
The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.
Approvals
Atex