Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
Push In 4 mm
Connector B
Push In 4 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
M5 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Zemlja podrijetla
France
Detalji o proizvodu
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
Threaded Tube Adaptors, Elbows and Tees
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 9,85
Each (In a Pack of 5) (bez PDV-a)
€ 11,524
Each (In a Pack of 5) (s PDV-om)
5
€ 9,85
Each (In a Pack of 5) (bez PDV-a)
€ 11,524
Each (In a Pack of 5) (s PDV-om)
5
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
5 - 20 | € 9,85 | € 49,25 |
25+ | € 9,65 | € 48,25 |
Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
Push In 4 mm
Connector B
Push In 4 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
M5 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Zemlja podrijetla
France
Detalji o proizvodu
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.