Phoenix Contact3208943 PT 4-FSI/F Series Fused DIN Rail Terminal, 4mm², Single-Level, Push In Termination, Fused, CSA
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactColour
Black
Number of Levels
Single
Series
PT 4-FSI/F
American Wire Gauge
24 → 10AWG
Termination Method
Push In
Cable CSA
4mm²
Fused
Yes
Voltage Rating
400 V
Current Rating
10A
Pitch
6.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Hazardous Area Certification
CSA
Standards Met
CSA, cULus, DNV GL, EAC
Model Number
PT 4-FSI/F
Zemlja podrijetla
Poland
Detalji o proizvodu
PT Type F Fused DIN rail terminal block - Phoenix Contact
The PT DIN rail mounted terminal blocks from Phoenix contact are fused, type F terminal blocks that give you the added protection compared to a conventional DIN rail terminal block. PT series blocks are small in size, so it allows for wiring in confined spaces while also allowing a more compact setup on a single rail. These terminal blocks have a double function shaft while also having an additional testing port and thanks to the push-in connection technology, you'll have an effortless install. Simply plug in your cable and ensure a tight connection has been made by slightly tugging the cable.
The housing is made from a black polyamide material and is backed by a flammability rating of V0. Not to mention, these PT terminal blocks also have an LED to allow you to determine your voltage rating.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 10,81
Each (bez PDV-a)
€ 12,65
Each (s PDV-om)
1
€ 10,81
Each (bez PDV-a)
€ 12,65
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactColour
Black
Number of Levels
Single
Series
PT 4-FSI/F
American Wire Gauge
24 → 10AWG
Termination Method
Push In
Cable CSA
4mm²
Fused
Yes
Voltage Rating
400 V
Current Rating
10A
Pitch
6.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Hazardous Area Certification
CSA
Standards Met
CSA, cULus, DNV GL, EAC
Model Number
PT 4-FSI/F
Zemlja podrijetla
Poland
Detalji o proizvodu
PT Type F Fused DIN rail terminal block - Phoenix Contact
The PT DIN rail mounted terminal blocks from Phoenix contact are fused, type F terminal blocks that give you the added protection compared to a conventional DIN rail terminal block. PT series blocks are small in size, so it allows for wiring in confined spaces while also allowing a more compact setup on a single rail. These terminal blocks have a double function shaft while also having an additional testing port and thanks to the push-in connection technology, you'll have an effortless install. Simply plug in your cable and ensure a tight connection has been made by slightly tugging the cable.
The housing is made from a black polyamide material and is backed by a flammability rating of V0. Not to mention, these PT terminal blocks also have an LED to allow you to determine your voltage rating.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.