TE Connectivity, jack Cable Mount BNC Connector, 50Ω, Crimp Termination, Straight Body

RS kataloški broj:: 669-3440robna marka: TE ConnectivityProizvođački broj:: 5-1634511-1
brand-logo
Prikaži sve u Coaxial Connectors

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

Taiwan, Province Of China

Detalji o proizvodu

Lithium-Ion Linear Battery Charger with LDO Regulator, STMicroelectronics

The STEVAL-ISB032V1 is an Evaluation Board based on the STNS01. It is a linear battery charger for single-cell Li-Ion batteries integrating an LDO regulator and several battery protection functions. The input supply voltage is normally used to charge the battery and provide power to the LDO regulator. When a valid input voltage is not present and the battery is not empty, the device automatically switches to battery power. When shutdown mode is activated, the battery power consumption is reduced to less than 500nA to maximize battery life during shelf time.

Battery Charging & Monitoring, STMicroelectronics

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

€ 4,40

Each (bez PDV-a)

€ 5,15

Each (s PDV-om)

TE Connectivity, jack Cable Mount BNC Connector, 50Ω, Crimp Termination, Straight Body
Odaberite vrstu pakovanja

€ 4,40

Each (bez PDV-a)

€ 5,15

Each (s PDV-om)

TE Connectivity, jack Cable Mount BNC Connector, 50Ω, Crimp Termination, Straight Body
Informacije o stanju skladišta trenutno nisu dostupne.
Odaberite vrstu pakovanja

Kupujte na veliko

količinaJedinična cijena
1 - 14€ 4,40
15 - 49€ 2,65
50 - 99€ 2,50
100 - 249€ 2,35
250+€ 2,20

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

Taiwan, Province Of China

Detalji o proizvodu

Lithium-Ion Linear Battery Charger with LDO Regulator, STMicroelectronics

The STEVAL-ISB032V1 is an Evaluation Board based on the STNS01. It is a linear battery charger for single-cell Li-Ion batteries integrating an LDO regulator and several battery protection functions. The input supply voltage is normally used to charge the battery and provide power to the LDO regulator. When a valid input voltage is not present and the battery is not empty, the device automatically switches to battery power. When shutdown mode is activated, the battery power consumption is reduced to less than 500nA to maximize battery life during shelf time.

Battery Charging & Monitoring, STMicroelectronics