TE Connectivity Transparent Polyolefin Solder Sleeve 24.5mm Length 1 → 3mm Cable Diameter
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityMinimum Cable Diameter
1mm
Maximum Cable Diameter
3mm
Sleeve Length
24.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Transparent
Series
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Zemlja podrijetla
Mexico
Detalji o proizvodu
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 1,09
Each (In a Pack of 100) (bez PDV-a)
€ 1,275
Each (In a Pack of 100) (s PDV-om)
100
€ 1,09
Each (In a Pack of 100) (bez PDV-a)
€ 1,275
Each (In a Pack of 100) (s PDV-om)
100
Kupujte na veliko
| količina | Jedinična cijena | Po pakovanje |
|---|---|---|
| 100 - 1400 | € 1,09 | € 109,00 |
| 1500 - 4900 | € 1,05 | € 105,00 |
| 5000+ | € 1,03 | € 103,00 |
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityMinimum Cable Diameter
1mm
Maximum Cable Diameter
3mm
Sleeve Length
24.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Transparent
Series
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Zemlja podrijetla
Mexico
Detalji o proizvodu
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.