TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 0.5mm² to 1mm², 22AWG

RS kataloški broj:: 465-643robna marka: TE ConnectivityProizvođački broj:: DR-2-50
brand-logo
Prikaži sve u Ring Terminals

Tehnička dokumentacija

Tehnički podaci

Series

Duraseal

Insulation

Insulated

Insulation Material

Nylon

Inner Ring Diameter

5.3mm

Outer Ring Diameter

10mm

Minimum Wire Size mm²

0.5mm²

Maximum Wire Size mm²

1mm²

Minimum Wire Size AWG

22AWG

Maximum Wire Size AWG

18AWG

Stud Size

M5

Colour

Red

Contact Plating

Tin

Contact Material

Copper Alloy

Thickness

1.4mm

Overall Length

34mm

Detalji o proizvodu

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

€ 0,64

Each (In a Pack of 50) (bez PDV-a)

€ 0,749

Each (In a Pack of 50) (s PDV-om)

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 0.5mm² to 1mm², 22AWG

€ 0,64

Each (In a Pack of 50) (bez PDV-a)

€ 0,749

Each (In a Pack of 50) (s PDV-om)

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 0.5mm² to 1mm², 22AWG
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Series

Duraseal

Insulation

Insulated

Insulation Material

Nylon

Inner Ring Diameter

5.3mm

Outer Ring Diameter

10mm

Minimum Wire Size mm²

0.5mm²

Maximum Wire Size mm²

1mm²

Minimum Wire Size AWG

22AWG

Maximum Wire Size AWG

18AWG

Stud Size

M5

Colour

Red

Contact Plating

Tin

Contact Material

Copper Alloy

Thickness

1.4mm

Overall Length

34mm

Detalji o proizvodu

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed