TE Connectivity Heat Shrink Tubing, Black 4.8mm Sleeve Dia. x 300mm Length 3:1 Ratio, SCL Series
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivitySleeve Diameter
4.8mm
Colour
Black
Shrunk Diameter
1.5mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
300mm
Material
Polyolefin
Operating Temperature Range
-55 → +110 °C
Flame Retardant
No
Halogen Free
No
Series
SCL
Detalji o proizvodu
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 12,66
Each (In a Pack of 5) (bez PDV-a)
€ 14,812
Each (In a Pack of 5) (s PDV-om)
5
€ 12,66
Each (In a Pack of 5) (bez PDV-a)
€ 14,812
Each (In a Pack of 5) (s PDV-om)
5
Kupujte na veliko
| količina | Jedinična cijena | Po pakovanje |
|---|---|---|
| 5 - 70 | € 12,66 | € 63,30 |
| 75 - 245 | € 12,21 | € 61,05 |
| 250+ | € 12,04 | € 60,20 |
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivitySleeve Diameter
4.8mm
Colour
Black
Shrunk Diameter
1.5mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
300mm
Material
Polyolefin
Operating Temperature Range
-55 → +110 °C
Flame Retardant
No
Halogen Free
No
Series
SCL
Detalji o proizvodu
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.