RS PRO Black Nylon Rod, 1m x 25mm Diameter
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProColour
Black
Length
1m
Material
Nylon
Form
Rod
Rod Diameter
25mm
Density
1.14g/cm³
Tensile Strength
75 MPa
Maximum Operating Temperature
+170°C
Flammability Rating
UL 94 HB
Elongation
25%
Water Absorption
7%
Zemlja podrijetla
Germany
Detalji o proizvodu
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
KM 168,39
KM 168,39 1 Lot of 2 (bez PDV-a)
KM 197,02
KM 197,02 1 Lot of 2 (s PDV-om)
1
KM 168,39
KM 168,39 1 Lot of 2 (bez PDV-a)
KM 197,02
KM 197,02 1 Lot of 2 (s PDV-om)
1
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
| količina | Jedinična cijena |
|---|---|
| 1 - 2 | KM 168,39 |
| 3 - 9 | KM 158,81 |
| 10 - 29 | KM 156,62 |
| 30+ | KM 148,19 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProColour
Black
Length
1m
Material
Nylon
Form
Rod
Rod Diameter
25mm
Density
1.14g/cm³
Tensile Strength
75 MPa
Maximum Operating Temperature
+170°C
Flammability Rating
UL 94 HB
Elongation
25%
Water Absorption
7%
Zemlja podrijetla
Germany
Detalji o proizvodu
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda