Tehnička dokumentacija
Tehnički podaci
Brand
Arcol OhmiteResistance
20mΩ
Power Rating
2W
Tolerance
±1%
Series
12
Maximum Operating Temperature
+275°C
Minimum Operating Temperature
-55°C
Zemlja podrijetla
Mexico
Detalji o proizvodu
Ohmite 10 Series Current Sense Resistors
Ohmite 10 Series are current sense axial resistors. Two versions of the 10 series axial resistors are available, with either two terminals or four terminals.
The four termination variation is designed for use in a Kelvin configuration. This configuration allows a current to be applied through two opposite terminals while the sensing voltage is measure across the other two terminals. The temperature coefficient of the terminals and the resistance is practically eliminated by the Kelvin configuration. The use of four terminals enables a lower self-heating drift and lower temperature coefficient of resistance than traditional two terminal axial resistors.
Current Sense - Axial Through Hole
RSD 3.285
RSD 657,094 komad (u vrečici od 5) (bez PDV-a)
RSD 3.943
RSD 788,513 komad (u vrečici od 5) (s PDV-om)
5
RSD 3.285
RSD 657,094 komad (u vrečici od 5) (bez PDV-a)
RSD 3.943
RSD 788,513 komad (u vrečici od 5) (s PDV-om)
5
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
količina | Jedinična cena | Po kesa |
---|---|---|
5 - 20 | RSD 657,094 | RSD 3.285 |
25 - 45 | RSD 547,36 | RSD 2.737 |
50 - 120 | RSD 536,909 | RSD 2.685 |
125 - 245 | RSD 488,575 | RSD 2.443 |
250+ | RSD 461,141 | RSD 2.306 |
Tehnička dokumentacija
Tehnički podaci
Brand
Arcol OhmiteResistance
20mΩ
Power Rating
2W
Tolerance
±1%
Series
12
Maximum Operating Temperature
+275°C
Minimum Operating Temperature
-55°C
Zemlja podrijetla
Mexico
Detalji o proizvodu
Ohmite 10 Series Current Sense Resistors
Ohmite 10 Series are current sense axial resistors. Two versions of the 10 series axial resistors are available, with either two terminals or four terminals.
The four termination variation is designed for use in a Kelvin configuration. This configuration allows a current to be applied through two opposite terminals while the sensing voltage is measure across the other two terminals. The temperature coefficient of the terminals and the resistance is practically eliminated by the Kelvin configuration. The use of four terminals enables a lower self-heating drift and lower temperature coefficient of resistance than traditional two terminal axial resistors.