Tehnička dokumentacija
Tehnički podaci
Brand
LumbergSeries
Minimodul
Pitch
2.5mm
Number Of Contacts
16
Number Of Rows
1
Body Orientation
Straight
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
5.0A
Voltage Rating
160.0 V
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Minimodul Vertical Locking Headers
These Lumberg Minimodul™ vertical locking pin headers mate with crimp contact housings (3114 Series) for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").
€ 16,90
€ 1,69 Each (In a Pack of 10) (bez PDV-a)
€ 19,77
€ 1,977 Each (In a Pack of 10) (s PDV-om)
Standard
10
€ 16,90
€ 1,69 Each (In a Pack of 10) (bez PDV-a)
€ 19,77
€ 1,977 Each (In a Pack of 10) (s PDV-om)
Standard
10
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
količina | Jedinična cijena | Po pakovanje |
---|---|---|
10 - 190 | € 1,69 | € 16,90 |
200 - 740 | € 1,43 | € 14,30 |
750 - 2990 | € 1,26 | € 12,60 |
3000+ | € 1,21 | € 12,10 |
Tehnička dokumentacija
Tehnički podaci
Brand
LumbergSeries
Minimodul
Pitch
2.5mm
Number Of Contacts
16
Number Of Rows
1
Body Orientation
Straight
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
5.0A
Voltage Rating
160.0 V
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Minimodul Vertical Locking Headers
These Lumberg Minimodul™ vertical locking pin headers mate with crimp contact housings (3114 Series) for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").