Adafruit 1770, TFT LCD Display 2.8in Resistive Touch Screen Display Module With MicroSD Socket - ILI9341
Tehnička dokumentacija
Tehnički podaci
Brand
ADAFRUIT INDUSTRIESDiagonal Display Size
2.8in
Display Technology
Resistive Touch Screen
Kit Classification
Display Module
Featured Device
MicroSD Socket - ILI9341
Kit Name
TFT LCD Display
Technology
TFT Display
Classification
LCD Touchscreen
Zemlja podrijetla
United States
Detalji o proizvodu
Adafruit 2.8 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.8” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
It is 3 V to 5 V compliant with high-speed level shifters so you can use with any microcontroller. If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
Adafruit LCD Touchscreens
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 53,50
Each (bez PDV-a)
€ 62,60
Each (s PDV-om)
1
€ 53,50
Each (bez PDV-a)
€ 62,60
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 4 | € 53,50 |
| 5 - 9 | € 48,50 |
| 10+ | € 45,50 |
Tehnička dokumentacija
Tehnički podaci
Brand
ADAFRUIT INDUSTRIESDiagonal Display Size
2.8in
Display Technology
Resistive Touch Screen
Kit Classification
Display Module
Featured Device
MicroSD Socket - ILI9341
Kit Name
TFT LCD Display
Technology
TFT Display
Classification
LCD Touchscreen
Zemlja podrijetla
United States
Detalji o proizvodu
Adafruit 2.8 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.8” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
It is 3 V to 5 V compliant with high-speed level shifters so you can use with any microcontroller. If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.