Altecnic Brass Thermostatic Washroom Valve, 22mm Compression
Tehnička dokumentacija
Tehnički podaci
Brand
AltecnicConnection
Compression
Body Material
Brass
Maximum Working Pressure
10 bar
Connection Size
22mm
Maximum Set Temperature
+50°C
Minimum Set Temperature
+30°C
Thread Standard or Connection Type
Compression
Temperature Setting Range
+30 → +50 °C
Zemlja podrijetla
Italy
Detalji o proizvodu
Altecnic Mechant Thermostatic Mixing Valves
Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.
The failsafe design shuts off the mixed water flow automatically in the event of disruption in the hot or cold water supply to the valve
Standards
BS EN 1111: 1999 and BS EN 1287: 1999 and the TMV2 Type Scheme
Basin, Bath & Shower Valves
A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 178,17
Each (bez PDV-a)
€ 208,46
Each (s PDV-om)
1
€ 178,17
Each (bez PDV-a)
€ 208,46
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 4 | € 178,17 |
| 5+ | € 175,29 |
Tehnička dokumentacija
Tehnički podaci
Brand
AltecnicConnection
Compression
Body Material
Brass
Maximum Working Pressure
10 bar
Connection Size
22mm
Maximum Set Temperature
+50°C
Minimum Set Temperature
+30°C
Thread Standard or Connection Type
Compression
Temperature Setting Range
+30 → +50 °C
Zemlja podrijetla
Italy
Detalji o proizvodu
Altecnic Mechant Thermostatic Mixing Valves
Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.
The failsafe design shuts off the mixed water flow automatically in the event of disruption in the hot or cold water supply to the valve
Standards
BS EN 1111: 1999 and BS EN 1287: 1999 and the TMV2 Type Scheme
Basin, Bath & Shower Valves
A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.