Festo Pneumatic Guided Cylinder - 170857, 32mm Bore, 40mm Stroke, DFM Series, Double Acting

RS kataloški broj:: 121-5434robna marka: FestoProizvođački broj:: DFM-32-40-P-A-GF
brand-logo
Prikaži sve u Pneumatic Guided Cylinders

Tehnička dokumentacija

Tehnički podaci

Brand

Festo

Stroke

40mm

Bore

32mm

Manufacturer Series

DFM

Action

Double

Pneumatic Connection

G 1/8

Maximum Operating Pressure

10 bar

Cushioning Type

Elastic

Model Number p

170857

Dimensions

121 x 110 x 49mm

Weight

2.1kg

Maximum Operating Temperature

+80°C

Length

121mm

Height

49mm

Minimum Operating Temperature

-20°C

Width

110mm

Zemlja podrijetla

Germany

Detalji o proizvodu

DFM Pneumatic Guided Cylinders - Slide Bearing

Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.

The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

€ 607,48

Each (bez PDV-a)

€ 710,75

Each (s PDV-om)

Festo Pneumatic Guided Cylinder - 170857, 32mm Bore, 40mm Stroke, DFM Series, Double Acting

€ 607,48

Each (bez PDV-a)

€ 710,75

Each (s PDV-om)

Festo Pneumatic Guided Cylinder - 170857, 32mm Bore, 40mm Stroke, DFM Series, Double Acting
Informacije o stanju skladišta trenutno nisu dostupne.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Brand

Festo

Stroke

40mm

Bore

32mm

Manufacturer Series

DFM

Action

Double

Pneumatic Connection

G 1/8

Maximum Operating Pressure

10 bar

Cushioning Type

Elastic

Model Number p

170857

Dimensions

121 x 110 x 49mm

Weight

2.1kg

Maximum Operating Temperature

+80°C

Length

121mm

Height

49mm

Minimum Operating Temperature

-20°C

Width

110mm

Zemlja podrijetla

Germany

Detalji o proizvodu

DFM Pneumatic Guided Cylinders - Slide Bearing

Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.

The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više