Fluke Networks FI-525 Single Mode & Multimode Fiber Inspection Scope
Tehnička dokumentacija
Tehnički podaci
Brand
Fluke NetworksCable Type
Single Mode & Multimode
Equipment Type
Fiber Inspection Scope
Connector Type
FC Port, LC Connector, LC Port, SC, ST
Resolution
1 μm
Interface Type
USB
Magnification
200
Battery Type
NiMH
Battery Life
3 h
Power Source
Battery, Mains
Includes
AC Adapter/Battery Charger, Cleaning Kit, FC Port, Fiber Probe and Display, LC Port, Probe Adapter Tips (1.5 mm Tip Set), Probe Adapter Tips (SC and Universal 2.5 mm Patch Cord Tip), Probe Adapter Tips (ST), Soft Carrying Case
Width
80mm
Weight
275g
Plug Type
Type B - North American 3-pin
Length
140mm
Dimensions
140 x 80 x 39mm
Minimum Operating Temperature
0°C
Height
39mm
Model Number p
FI-525
Maximum Operating Temperature
+40°C
Zemlja podrijetla
Lithuania
Detalji o proizvodu
FI-525 FiberInspector Micro and Cleaning Kit
FI-525 FiberInspector Micro and Cleaning kit. Wet and dry cleaning supplies to remove contamination discovered during fiber inspection with the FI-500.
Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations.
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Supplied with
FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries, universal power adapter and cleaning kit
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Brand
Fluke NetworksCable Type
Single Mode & Multimode
Equipment Type
Fiber Inspection Scope
Connector Type
FC Port, LC Connector, LC Port, SC, ST
Resolution
1 μm
Interface Type
USB
Magnification
200
Battery Type
NiMH
Battery Life
3 h
Power Source
Battery, Mains
Includes
AC Adapter/Battery Charger, Cleaning Kit, FC Port, Fiber Probe and Display, LC Port, Probe Adapter Tips (1.5 mm Tip Set), Probe Adapter Tips (SC and Universal 2.5 mm Patch Cord Tip), Probe Adapter Tips (ST), Soft Carrying Case
Width
80mm
Weight
275g
Plug Type
Type B - North American 3-pin
Length
140mm
Dimensions
140 x 80 x 39mm
Minimum Operating Temperature
0°C
Height
39mm
Model Number p
FI-525
Maximum Operating Temperature
+40°C
Zemlja podrijetla
Lithuania
Detalji o proizvodu
FI-525 FiberInspector Micro and Cleaning Kit
FI-525 FiberInspector Micro and Cleaning kit. Wet and dry cleaning supplies to remove contamination discovered during fiber inspection with the FI-500.
Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations.
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Supplied with
FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries, universal power adapter and cleaning kit